Login
Register

Displaying items by tag: Spring

Friday, 27 August 2021 14:04

Rolex's Better Springs

 

On June 22nd, 2021, Rolex was awarded a United States patent on the pictured inventio: an redesigned spring for watch movement. 

Springs can be a pain in watchmaking. They take up a lot of space in the movement, they are difficult to install, and often fragile. Not to mention that they tend to fly across the room when mishandled.

So, Rolex proposed an interesting solution in their December, 2016 patent application. The picture above shows the basic idea. It's an arbor with a spring around it. The spring has stops against a housing around the arbor, and can either be pre-stressed or not. So, when a rotational force is applied to the arbor (15) or a wheel attached to the arbor (12, 12'), it will tighten or loosen the spring (depending on pre-stress).

 

 

In the picture above, the spring would be attached to the arbor (25). In this case the yoke spring, which is normally a large piece, instead takes up a small amount of space where the arbor of the yoke would be anyway. This eases installation and repair, though increases manufacturing costs – which are not traditionally a big concern for Rolex. 

 

Published in Patents
Tuesday, 22 January 2019 22:00

Patek's Twin Spring Single Barrel Watch

The barrel of the watch contains the mainspring, the wound piece of metal that provides the power for the watch to tick. Most watches get 36-40 hours of power from a fully wound mainspring. There are watches that have double barrels, and two mainsprings, to provide 80-100 hours of power. There are also some, more novelty watches, with several barrels and mainsprings.

Typically multiple barrels are placed in series to provide a more consistent power output over time.

And then there is Patek, with their 2013 patent on a single barrel with two stacked mainsprings. The main advantage Patek claims in their application is that by stacking them, you end up savings space. You can have a ratchet for winding on one side of the barrel, and a wheel on other for driving the movement, while still having the benefit of two springs.

I don't think this is particularly revolutionary, but it's an interesting space saving design. 

Published in Patents